Bestchem Methanol Premix 90% (for water injection)

Deal Information

BESTCHEM METHANOL PREMIX (FOR WATER INJECTION) also known as anti-detonant injection, is spraying water/methanol mix into the incoming air or fuel-air mixture, or directly into the cylinder, in order to cool certain parts of the induction system where "hot points" could produce premature ignition. Methanol acts as a cooling agent, increases volumetric efficiency and lower the air intake temperature dramatically, much more cooling than an intercooler. It also permits the use of very high compression ratios.

Bestchem Methanol Pre-Mix is a blend of 10% deionized water and 90% methanol. Deionized water which is also known as demineralized water (DI water) is water that has had its minerals removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionised water in laymen terms means purified process water which has most of the dissolved solids removed. Deionized water should be used in the mixture to ensure the accumulation of scale and foreign matter is eliminated, which may contribute to the accumulation of scale and foreign matter in the water injection plumbing system.

*Delivery will be fulfilled by Seller's own fleet (3-5 Working Days)*

Return & Warranty

The Customer may not cancel orders once accepted by Bestchem. Bestchem may allow an order to be cancelled at its discretion, subject to Bestchem recovering from the Customer the costs incurred by Bestchem. If only part of an order is cancelled, Bestchem may invoice the Customer any difference in selling price per unit applicable to the quantity actually despatched prior to cancellation compared to the quantity ordered.
The Customer may only return Products to Bestchem, and receive a credit or refund, on the following conditions:

- the Customer must contact Bestchem in advance and obtain the prior consent of Bestchem.
- return must be made within 7 days of the date of delivery (as stated on the delivery documentation).
- Products shall be returned in their original packaging with the original Bestchem label affixed, and unaltered in form and content. Product must be in a condition which will enable them to be immediately fit for re-sale.

Bestchem reserves the right to request a disposal instead of return.
Products accepted for return will be credited at invoice value. Bestchem will apply a restocking fee of 20% of invoice value or S$10 whichever is higher for Products returned within 7 days of the date of delivery. For Products returned 7 days or more after the date of delivery, prior approval must be given by Bestchem and, if approved, Bestchem will apply a restocking fee of 30% of invoice value or S$15 whichever is higher, otherwise, Bestchem will refuse delivery and return the products at the Customer's expense.